• market@dagaotech.com
  • +86-577-67318591
    Share

{$yz_fenleititle$}

{$yz_fenleicontent$}

HRF3 High temperature and high pressure Disc type steam traps

HRF3 High temperature and high pressure Disc type steam traps is made of alloyed steel.It can operate in the environment of 550℃ with agile action and high quality.It is appropriate for the water discharge in the environment of high temperature and pressure.It is one of the optimal traps for the steam pipelines and steam equipment of high pressure. Structure:1.The automatic blowing equipment is equipped inside the valve.With new crow-type valve disc and reliable sealing performance;warm-keeping,…

Lever Ball Float Type Steam Traps

Ball float steam traps have an integral air vent as standard and the options of a manually adjustable needle valve and drain cock tapping,the Ball floating range is adaptable to all applications where ball float traps are recommended and instantaneous removal of condensate is required.

Thermodynamic Steam Traps

The TANA Thermostatic Steam Traps & Thermodynamic Steam Traps are available with balanced-pressure bellows or wafer-type elements, which are constructed in a variety of materials in both stainless steel and carbon steel. These traps are used on applications with very light condensate loads.

Free float ball type steam traps

Free float steam trap is one of the most advanced traps since its ability of timely discharge of the condensed water in the pipelines and heating equipment. This trap has an extensive application in petroleum, chemical industry, light textile, printing, pharmacy, paper making, foods and mines.Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency.When steam pressure changes, the ball float can adjust the opening of valve seat without influ…

Inverted bucket steam traps

The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of …

Foot Valve

Foot valve is a special type of check valve that has a built-in strainer.It is installed at the intake side of a suction pipe and pump.its purpose is to prevent the loss of prime when the liquid source (wet well) is lower than the pump.prime is designed as the charge of loquid required to begin pumping action and priming is the process of filling the pump and suction pipe with liquid.The check valve part of the foot valve opens when the pump starts to allow liquid to enter the suction pipe and pu…

Top